LumiPore PRO

LumiPore PRO

White
$179.00
Skip to product information
LumiPore PRO

LumiPore PRO

5-in-1 Age Renewal Wand for a lifted, glowing complexion.

Customisable
Safe & Easy To Use
12 Month Warranty
In stock
$179.00

Say goodbye to microneedling, botox and downtime. Say hello to our all new LumiPore Pro. 

Engineered with the latest advancements in non-invasive K-beauty technology, this revolutionary clinical grade 5-in-1 device will radically fade fine lines and wrinkles, make your skin look younger and deliver an every day glow right from the comfort of your own home.

Prepping the skin

Your skin should be clean and fresh. Cleanse the face and neck to remove any applied formulations like makeup or pre-existing skincare. Ensure your skin is mostly oil free if using the EMS or EP mode, as this will interrupt the electrical current.

How To Use
  1. The LumiPore Pro has 4 modes:
    Mode 1: Heat Therapy + RED LED
    Mode 2: EMS + Blue LED
    Mode 3: EP + Green LED
    Mode: 4: Vibration Therapy: Yellow LED
  2. It is not imperative however we recommend using a water based serum or gel during treatment to assist with gliding along with the skin and conduction of the electrical currents. Do not use an oil based gel or serum as this will interrupt the current.
  3. To turn on, press and hold the bottom button for 2 seconds.
  4. To switch between modes, press the the bottom button once.
  5. To increase or decrease the intensity of each mode, press the top button once.
  6. Apply the head to the skin, gliding in an upward motion. Avoid directly under the eye.
  7. Use the device 5-10 minutes per day, 3 times per week. Consistency is key for results and results may differ from person to person.
  8. If you have open wounds, heart issues, pacemakers, are pregnant, or have facial implants you should not use the LumiPore Pro.
  9. While using EP (electroporation), we recommend avoiding products with strong acids (like AHAs), retinol, or alcohol-based formulas, as they can irritate the skin.
  10. If you have any concerns, we recommend consulting with your doctor prior to use.
Features
  1. EMS: Frequency 20khz 70-75V
  2. Electroporation: 30hkz 130-135V
  3. Red LED Light Therapy: Approx 660nm
  4. Blue LED Light Therapy: Approx 453nm
  5. Yellow LED Light Therapy: Approx 590nm
  6. Green LED Light Therapy: Approx 520nm
  7. Heat Therapy: Approx 36-47 Degrees
  8. Vibration Therapy: 13,000rpm/min
When will I get my order?

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location. Usually it takes 8-15 days to arrive

Clinician trusted

Enhances absorption

Natural face lift

Supports collagen

Technology meets timeless skin

With age, skin naturally loses firmness, elasticity, and radiance. The LumiPore Pro gives you the tools to restore confidence safely, effectively and pain free. This professional grade device offers 4 modes and 3 adjustable levels, letting you tailor each treatment to your skin's unique needs.

5 Technologies, 4 Modes

You may also like

See the technology in action:

REAL FACES.
REAL RESULTS.

Common Question:


FAQ's

Q: Is it safe to use?
A: Yes! The LumiPore Pro is specifically designed with controlled electrical currents to ensure it is safe to use at home. We recommend reading the instructions prior to use. If you have open wounds, heart issues, pacemakers, are pregnant, or have facial implants you should not use the LumiPore Pro.

Q: Do I need to avoid the eye area?
A: Whilst the LumiPore Pro is great for reducing those fine lines around the crows feet region, we reccommend avoiding use direct above and below the eye.

Q: Does it hurt?
A: Most users will experience facial contractions whilst using EMS or EP however it is not painful. Some users will experience tingling post treatments - this is nothing to be alarmed about and will generally subside quickly.

Q: How often can I use it?
A: We recommend using the LumiPore Pro 2-3 times a week for approximately 10 minutes per treatment. If using EMS and EP, we recommend alternating these treatments on different days for best results.

Q: Will it get rid of my double chin?
A: Whilst results differ from person to person, studies have shown using facial EMS consistently may results in over an 18% increase in firmness, tone and lift.

Q: I have acne, can I use it?
A: The LumiPore Pro is general safe to use however we reccommend against using the EP function if you have broken, irritated or highly inflamed skin. If you have skin concerns, please consult with your doctore prior to use.

Q: Do I have to used a gel?
A: It is not imperative however we recommend using a water based gel to assist with gliding the LumiPore Pro against your skin. It may also assist with the conductivity of the electrical currents.

Q: Can I use EP along with other skincare treatments?
A: Yes, you can use an EP device alongside other skincare treatments like exfoliating, microdermabrasion, or microneedling, however we recommend spacing them out to avoid over-stimulating the skin.

Features
  1. EMS: Frequency 20khz 70-75V
  2. Electroporation: 30hkz 130-135V
  3. Red LED Light Therapy: Approx 660nm
  4. Blue LED Light Therapy: Approx 453nm
  5. Yellow LED Light Therapy: Approx 590nm
  6. Green LED Light Therapy: Approx 520nm
  7. Heat Therapy: Approx 36-47 Degrees
  8. Vibration Therapy: 13,000rpm/min
Prepping the skin

Your skin should be clean and fresh. Cleanse the face and neck to remove any applied formulations like makeup or pre-existing skincare. Ensure your skin is mostly oil free if using the EMS or EP mode, as this will interrupt the electrical current.

How to Use?
  1. The LumiPore Pro has 4 modes:
    Mode 1: Heat Therapy + RED LED
    Mode 2: EMS + Blue LED
    Mode 3: EP + Green LED
    Mode: 4: Vibration Therapy: Yellow LED
  2. It is not imperative however we recommend using a water based serum or gel during treatment to assist with gliding along with the skin and conduction of the electrical currents. Do not use an oil based gel or serum as this will interrupt the current.
  3. To turn on, press and hold the bottom button for 2 seconds.
  4. To switch between modes, press the the bottom button once.
  5. To increase or decrease the intensity of each mode, press the top button once.
  6. Apply the head to the skin, gliding in an upward motion. Avoid directly under the eye.
  7. Use the device 5-10 minutes per day, 3 times per week. Consistency is key for results and results may differ from person to person.
  8. If you have open wounds, heart issues, pacemakers, are pregnant, or have facial implants you should not use the LumiPore Pro.
  9. While using EP (electroporation), we recommend avoiding products with strong acids (like AHAs), retinol, or alcohol-based formulas, as they can irritate the skin.
  10. If you have any concerns, we recommend consulting with your doctor prior to use.
Cleaning

Clean with dry or lightly damp soft fabric.

This device is not waterproof, so avoiding direct contact with water is highly recommended. Do not use any strong chemical substances that may lead to corrosion. When not in use, store in a dry environment.